IntroductionGreat attention is devoted to the study of photocatalytically active materials [1], which is associated with the urgency of the problem of air and water purifying from harmful substances of organic origin, creating self-cleaning surfaces, as well as the disposal of environmentally hazardous toxic organic substances. Due to the chemical resistance and stability of the titanium dioxide-based materials properties, they are of great practical importance for this field of application. Due to its zone structure titanium dioxide shows photocatalytic properties when exposed to electromagnetic radiation of the UV range, which allows using only about 4 % of the radiation intensity of sunlight. In [2] the doping of titanium dioxide with noble metal nanoparticles was proposed, which led to an increase in the number of electrons and holes generated in the UV/Visible range and correspondingly to an increase in photoactivity. Theoretical calculations showed the change in the density of electronic states for nanostructures of such oxides as MgO, TiO2, etc. [3, 4].It was shown [5] that titanium dioxide nanotubes synthesized from natural raw materials were an effective photocatalytic reactor and could be considered as an alternative to the currently used commercial analogs. The results of the study of photocatalytic activity of synthesized titanium dioxide nanostructures on the example of organic pollutants decomposition reaction in an aquatic environment were presented, the reaction constants were calculated with the Langmuir-Hinshelwood model. This paper shows redistribution of electrons in low-dimensional oxide structures and influence of geometry of the photocatalytic nanoreactor (one-dimensional titanium oxide nanostructures) on its activity. ExperimentalThe starting material is mainly a mixture of two high crystallinity phases: rutile and quartz (from the concentrate of titanium ore of the Pizhemskoe deposit, Russia). Weak reflexes of clay minerals, ilmenite, and anatase are present. The chemical composition (wt. %) is represented by TiO2 — 42.12, SiO2 — 46.57. Iron, aluminum oxides, etc. are in small amounts.The titanium dioxide nanotubes were synthesized from natural raw materials by the method developed by the authors [6]. The shape and size of the starting material and synthesized samples were investigated by scanning electron microscopy (TESCAN Vega 3). The chemical composition was determined by the X-ray fluorescence method (Shimadzu XRF-1800). Results and discussionThe phase composition of the synthesized sample is represented by quartz and a low-crystallinity phase corresponding to the formed one-dimensional titanium oxide nanostructures identified as sodium-containing hydrated titanate (H2-xTi3O7). SEM images (Fig. 1) allow estimating the geometric parameters of the obtained one-dimensional nanostructures: outer diameter is about 50–115 nm, length is 5–6 µm. The chemical composition (wt. %): TiO2 — 74.68, SiO2 — 12.64, Fe2O3 — 5.44, Al2O3 — 4.71, Na2O — 0.14. Other elements are present in small amounts, which concentration and composition depend on the starting raw material and synthesis conditions.Structural transformation at the nanoscale — the formation of titanium dioxide nanotubes from natural raw materials — leads to a decrease in the bandgap width: 2.4 eV for titanium dioxide nanotubes in contrast to anatase (3.2 eV). In [2] a similar effect was achieved by doping with gold (or silver) nanoparticles, which formed additional states in the bandgap, and, as a consequence, there was a shift of the absorption towards the visible radiation and enhancement in the electron-hole pair generation processes.In the case of structural transformation, the shift of the absorption towards visible radiation and the activation of electron-hole pair formation (i.e., reactivity) and catalytic activity are achieved due to a higher proportion of surface atoms as well. When considering the absorption of various types of radiation by titanium oxide nanostructures, we can assume that the proportion of surface atoms equals 100 %, i. e., assume that absorption occurs throughout the nanoparticle (Fig. 2a). In addition, the wave functions describing the electronic states in one-dimensional nanostructures are limited to one direction, which is dictated by their geometry (nanotubes can be considered one-dimensional objects) [7]. Near the upper boundary of the valence band and the lower boundary of the conduction band, the distribution of density of electronic states takes on a discretization (Fig. 2b).The isomorphic iron impurity is a natural ligand (doping atom), due to which an additional allowed state appears inside the bandgap [8].ConclusionStructural transformation at the nanoscale — the formation of titanium dioxide nanotubes from natural raw material — leads to a decrease in the bandgap width to 2.4 eV. The isomorphic iron impurity results in the appearance of an additional state inside the bandgap, and, as a consequence, also shifts the absorption towards visible radiation. The obtained nanostructures of titanium oxide are more active photocatalytic nanoreactors in comparison with their macroanalogs due to the structural transformation at the nanolevel and the natural doping atom (iron).